Masking Fluid (20g) Tamiya 87229 Masking Fluid

Masking Fluid (20g) Tamiya 87229

[Ideal for masking small surfaces] This liquid masking agent is perfect for masking curved surfaces and complex shapes where masking tape does not adhere well. Ease of use is also key, as it can be applied directly from the nozzle at the end of the bottle. Both primer and topcoat can be used under various paints such as acrylic, enamel, and lacquer, and the dried masking fluid can be easily cut away with a knife. Light green water-based type.

[Technical specifications] Bottle 20g

[Instructions for use]

1. Remove oil from the surface to be masked using a neutral detergent.
2. Apply directly from the bottle and allow to dry completely.
3. Cut away the part you want to paint with a knife, remove the unnecessary parts, and then paint.
4. After the topcoat has dried completely, remove the masking fluid.

• Apply the masking fluid after the base paint has dried completely.
• Please gently spread the masking fluid (it will dry in about 30 minutes). The thicker the paint, the longer it takes to dry.
• When cutting the dried masking fluid, use a new cutting blade. If the cut edges are floating, hold them firmly before painting.
• This product is water-soluble. When applying a water-soluble topcoat, be careful not to melt it.
• When applied to a complex mold, it may be difficult to remove once dried.
• Be careful not to hold the container too tightly, as the fluid may spill.
• If the nozzle is clogged, remove it and clean it.